How to Attach a Quiver to a Recurve Bow

How to Attach a Quiver to a Recurve Bow?

A quiver is an excellent equipment that holds your arrow during your shooting time. In the past, people used to strap their quivers to their backs, but now you can attach a quiver to your bow without any hassle.

Now, you might ask, how to mount an arrow quiver? Luckily, with proper tools and techniques, you can get this thing done without any hassle. If you use a recurve bow, you will also be able to do that.

In the following article, we will talk about how to attach a quiver to a recurve bow. This guideline will be really helpful if you are new to this area.

So, let’s not waste any more time and dive right into it.

Quiver Types


Before we go through the process of attaching the quiver to your recurve bow, it is best that you should know the quiver types beforehand.

It comes in two types, detachable and permanent. With the former one, you can easily remove it from the bow whenever your situation demands. On the other hand, you have to remove the latter one with a wrench or other necessary tools.

The detachable quiver is also known as 1-Piece, and the permanent one goes with the name 2-Piece. Keep in mind that each of them needs to be mounted in a different way.

1-Piece Detachable Quiver

If you use the 1-Piece type, you have to mount it over the bow sight. These have only a single point of contact, and you should remove them before your shoot. If you leave it on the bow, it will create a loud noise because of the vibration.

The plus side is that it is highly famous among shooters because most of them prefer their arrow and quiver to be removed from their bow before their shot. 

2-Piece Permanent Quiver

With the 2-Piece type, you have to mount it at the bottom and top of the bow riser. This process allows the platform to be stable and solid. Moreover, it decreases the vibration when you are shooting as the quiver has two separate anchor points.

How to Mount an Arrow Quiver?


You will be happy to know that mounting a quiver is not challenging. Plus, it won’t cost you much time and physical effort to get the job done.

Here is the step-by-step process.

Step 1: Place the Recurve Bow on Your Workstation

This mounting process requires precision and stability, so you should clean your workstation in advance. After that, take your recurve bow and place it on the worktable.

Step 2: Use a Hex-key or Allen Wrench

A hex-key or Allen wrench is an essential tool that allows you to loosen or tighten the screws. This comes with a cross-section that has a hexagonal shape and can fit with different screws that have recessed holes with a hexagonal structure.

Take this wrench in your hand and proceed to the next step.

Step 3: Attach the Quiver to the Bow

To successfully join the quiver, you should attach the quiver mounting bracket to the bow sight with the Allen wrench. Use the quiver holes (pre-existed) to make it happen.

Once you have successfully tightened the quiver bracket, you are now ready to attach the quiver to the bow. Make sure the quiver placement is accurate and perfect, or else you have to restart the whole process.

Congrats! You are done with the task.

Some Facts:

Below are some of the facts that you can go through to gain additional information about the arrow quiver for recurve bow.

Fact 1: You Can Easily Mount the Quiver Over the Bow Sight

Almost all the quivers mount smoothly and easily over the bow sight. After you have successfully screwed into threaded holes in the mounting bracket of the sight, you can have a sight of relief because of that.

Fact 2: The Threaded and Sight Mounting Holes Come with an Identical Size and Spacing

Yes, the threaded holes come with an identical size and spacing like the one you will find in the sight mounting holes. As a result, you can finish the DIY recurve bow quiver task without any hassle.

Fact 3: The Latest One-piece Quivers Come with an Upgraded Feature

If you check the latest one-piece quivers, you will notice that they have vertical adjustments that allow you to change the quivers’ placement on your bow. Due to that, the nocks won’t accumulate dirt if you put your bow on the ground.

Tip

  • If you will purchase a 2-Piece quiver, check whether it fits your bow or not.
  • As the 2-Piece arrow holder quiver doesn’t always come with universal mounting brackets, you should consult with the supplier about this issue.
  • Ensure that your quiver mount is tight so that you can avoid the excessive vibration issue. Besides, check their condition several times per year.
  • Before you go out hunting, think about the number of arrows you will need for this purpose, as quivers can hold between 2 and 8 arrows.

Frequently Asked Questions (FAQ)


Do all quivers fit all bows?

The main purpose of a quiver is to hold arrows. A one-piece quiver fits all kinds of bows with ease. Any type of bow that has a standard sight is compatible with a one-piece quiver.

A two-piece quiver allows you to mount it on a different-sized bow riser (handle or frame). As this type doesn’t use universal brackets most of the time, it needs to be hardware-specific according to the model and brand of bow you will purchase.

How do you put an arrow in a quiver?

You can do it by dragging the arrows into the inventory slots. These slots are empty, so you won’t have a problem doing that.

Conclusion


Learning how to attach a quiver to a recurve bow is not a mystery anymore. Hope this article gave you all the information that you were looking for in the first place.

Don’t forget to share it with your friends and family members. Let them know all how to mount an arrow quiver.

Have a nice day. Take care.

Leave a Comment

Your email address will not be published. Required fields are marked *