How to Tie a Bowfishing Arrow

How to Tie a Bowfishing Arrow?

A bowfishing arrow is a very important tool for your bowfishing task. Fish arrows consist of 2 individual holes, one on the head end and the one on the nocks’ front. You can use it to rig arrows in several ways.

Yes, bowfishing is fun and relaxing, and if you don’t know how to tie the arrow properly, then you will be in jeopardy. Don’t worry because we have got you covered.

In this article, we will talk about how to tie a bowfishing arrow. With this guideline, you can get your job done within a short period of time. Without further ado, let’s get started.

The Step-by-Step Process


Below we have included a step-by-step process that you can follow to get the job done. Check it out.

Step 1: Check the Safety Slide

If you are using the arrow that works with a safety slide, you should definitely check some aspects beforehand. Most of the slides come with two separate holes so that the line can easily go through.

Moreover, there is a groove located between each hole that locks and secures the line in its position. So, make sure you check the safety slide and find out the purpose of the holes.

Step 2: Move the Lines’ End into One of the Holes

This step is very important, and you must do it carefully. Start with running the lines’ end into one of the holes. You should do it toward the slides’ side that is grooved.

Now, go along the groove and move through the other hole with the lines’ end. Go to the slide and pull a 6 to 8-inch tag through it. After that, you should move the slide to the arrows’ tip.

Step 3: Create a Big-Sized Loop

When you are done with the previous step, you should connect the lines’ tag end with the lines’ main section that is going through the slide. Now, you are ready to create a big-sized loop.

Step 4: Finish It Off

Pass the arrows’ tip through this loop. Slowly move the slide to the arrows’ rearmost position. Pull the loop and do it gently over the slide. Make sure it is going past the nock of the arrow. In this way, you can easily make an overhead knot.

Finally, pull the line tightly and don’t do it too much. Just ensure that the bowfishing arrow knot is at a minimum of 2 inches behind the arrows’ nock. This strategy allows a smooth arrow flight, and when you pull in a giant fish, you won’t have a problem doing that.

Congrats! You have successfully tied your bowfishing arrow.

Bowfishing Bow Setup: The Process


If you want to set up your bowfishing bow properly, you should go through this section.

Step 1: Choose a Bowfishing Reel

Your first task will be to choose a bowfishing reel. It comes in three different types, so you won’t have a problem choosing the one that suits your requirement.

The types arehand reel, spinning reel, and bottle reel. You can mount the bottle and hand reels into your bows’ riser with ease.

Keep in mind that all the reels are constructed in a way that they will easily fit with recurve and compound bows. Unfortunately, it won’t work with longbows and traditional and popular wooden recurves.

Step 2: Use a Good Quality Arrow Rest

Avoid using a normal arrow rest which is typically used by hunters, as this will waste your time and be a problem during bowfishing. Unfortunately, you can’t shoot your arrows with this type of arrow rests because they have a string connected to them.

Besides, it can cause injury, so it is best that you go for a good quality arrow rest. This type of bow equipment comes with an upgraded design and is very user-friendly when it comes to shooting an arrow.

Step 3: Purchase Bowfishing Arrows

Finally, you need to purchase bowfishing arrows. These are heavy because the arrows are constructed with fiberglass. Don’t worry because it comes with a bowfishing safety slide that is already drilled in advance.

When you use a bottle reel, you have to use the safety slide. On the other hand, you can use two different approaches for a spinner reel. The first one is to fasten the string onto your arrow, and the other one is to go for the safety slides.

Step 4: Finish It Off

Next, you should find the nocking point and tune the whole thing up. After that, take an arrow and tie it up.

Finally, fine-tune the bowfishing bow.

Tips:


Here are some of the tips that can help you after you have tied the bowfishing arrow.

Tip 1: Take the Help of Finger Savers

Yes, finger savers allow you to shoot easily and smoothly. These are made of rubber and can save your fingers all the time. Use it on your bowstring so that you can get the best result.

Another approach you can take is to use a glove. Choose which hand you will use to draw the bow and wear it on that particular hand. Besides, you can opt for a shooting tab if you are not comfortable with the glove. Just make sure you are taking precautions in advance.

Tip 2: Use a Bowfishing Laser Sight to Shoot Precisely

Because of the waters’ refraction, you might not shoot properly, and the whole process can become challenging. This confuses your eyes and makes you think that the fish is closer, whereas the scenario is not what it seems like.

In this case, you should aim in a different way to get the job done. So, a laser sight for bow fishing will be the perfect fit in this type of situation. With this equipment in your arsenal, you will get accurate shots, and the best thing is, you can quickly finish the shooting.

Conclusion:

Hope you now knowhow to tie a bowfishing arrow. If your friends or family members love bowfishing, share this article with them. They will definitely be happy with this beneficial information.

Read it a couple of times and take notes wherever you find something important. Best of luck!

Leave a Comment

Your email address will not be published. Required fields are marked *